|
Brake %
Front/Rear |
Tire Stagger |
Wheel Offset |
Other Adjustments |
Other Problems |
| Push (B) Corner Entry |
Decrease Front Brake
Increase Rear Braking |
Increase Front |
Move RF In |
Check Camber
Alignment & Toe Out |
Shock Bent, A-Frame Binding |
|
| Push (C) Corner Entry |
Decrease Front Brake
Increase Rear Braking |
Increase Front |
Move RF In or
Move RR Out |
Check Front Tires for Hardness & Wear |
Brake Pedal
Balance Bar Binding |
|
| Push (D) Mid Corner |
Decrease Front Brake
Increase Rear Brake |
Increase Front & Rear |
Move LR In or
Move RR Out |
Move Axle
Dampner Shock to Left |
Right Front Caliper Binding
Tires Old |
|
| Push (E) Mid Corner |
See other adjustments |
Increase Rear |
Move LR In or
Move RR Out |
Raise RR Trailing Arm
Check Rear Alignment |
Bent Axle Housing, RR toe in, LR toe out |
|
| Push (F) Corner Exit |
See other adjustments |
Increase Rear |
Move LR In or
Move RR Out |
Decrease Torque Link or Upper Link Angle |
|
|
| Push (G) Corner Exit |
See other adjustments |
Increase Rear |
Move LR In or
Move RR Out |
Move Torque Link/Arm Right |
Broken RR Axle |
|
| Push (H) Corner Exit |
See other adjustments |
Increase Rear |
Move LR In or
Move RR Out |
Decrease Rear Gear Ratio |
|
|
| Loose (B&C) Corner Entry |
Increase Front Brake
Decrease Rear Brake |
Decrease Front |
Move RF Out or
Move RR In |
Increase Rear Gear Ration |
Rear Suspension Unloading
Linkage Loose |
|
| Loose (D) Mid Corner |
Increase Front Brake
Decrease Rear Brake |
Decrease Rear |
Move RF Out or
Move RR In |
Increase Throttle
Linkage Ratio |
Too Much Trail in Rear, Bent Shock, Slider, etc |
|
| Loose (E) Mid Corner |
See other adjustments |
Decrease Rear |
Move RR In or
Move LR Out |
Increase Torque Link or Upper Link Angle |
Suspension Bottoming Out, Tires Old, Torque Link Binding |
|
| Loose (F) Corner Exit |
See other adjustments |
Increase Rear |
Move RR In or
Move LR Out |
Increase LR Trailing Arm Angle |
Bent Axle Housing, LR Toe In, RR Toe Out, Drive Line Bind |
|
| Loose (G) Corner Exit |
See other adjustments |
Decrease Rear |
See other adjustments |
Torque Link/Arm Spring too Soft |
Not Enough Pinion Angle, Tires Old |
|
